Toshiba Carrier MMC-AP0181H2UL, Service Manual

Page: 127 / 178

127
No.
3
Part name
Electric
parts box
Procedure
1. Detachment
1) Carry out works of Detachment of
1
and
2
.
2) Remove the power supply wire and the
remote control wire and control wires from
the terminal blocks.
3) Remove the power supply wire from cord
clamp at side of the electric parts box.
4) Remove screws (M4, 0.39"(10 mm), 2 pcs.))
of the electric parts box and pull out
downward.
5) Hook the hooking section temporarily at the
rear side of the electric parts box to the
sheet fittings part of the main unit.
2. Attachment
1) Insert the square hole of the electric parts
box into the claw of the main unit.
2) Attach screws (M4, 0.39"(10 mm), 2 pcs.))
to the electric parts box.
3) Connect the power supply wire and the
remote control wire and control wires as
before.
4) Carry out works of Attachment of
1
and
2
.
Remarks
Screw
Cord clamp
U
1 U
2
A B
L
1 L
2
Cord clamp
Control wiring/Remote
control terminal block
Power supply
terminal block
Claws of main unit
Square hole of
electric parts box Sheeted folding up
section of main unit