Toshiba BU SERIES Instruction Manual Download Page 6

Page: 6 / 94

5 / 92

http://www.toshiba-teli.co.jp/en/

D4253386C

CASES FOR INDEMNITY (LIMITED WARRANTY)

We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the

user in the following cases.

● In the case damage or losses are caused by natural disasters, such as an earthquake and thunder, fire, or

other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme

operating conditions.

● In the case of indirect, additional, consequential damages (loss of business interests, suspension of

business activities) are incurred as result of malfunction or non-function of the equipment, we shall be

exempted from responsibility for such damages.

● In the case damage or losses are caused by failure to observe the information contained in the

instructions in this instruction manual and specifications.

● In the case damage or losses are caused by use contrary to the instructions in this instruction manual and

specifications.

● In the case damage or losses are caused by malfunction or other problems resulting from unintended use

of equipment or software etc. that are not specified.

● In the case damage or losses are caused by repair or modification conducted by the customer or any

unauthorized third party (such as an unauthorized service representative).

● Expenses we bear on this product shall be limited to the individual price of the product.

● The item that is not described in specifications of this product is out of the guarantee.

● The case of damages or losses which are caused by incorrect connection of the cable is out of the

guarantee.

Summary of Contents for BU SERIES





























































































Search results

Summary of Contents for BU SERIES

Reviews:

Related manuals for BU SERIES

Brands by name

Popular brands

Toshiba BU SERIES, Instruction Manual

Search results

Summary of Contents for BU SERIES

Reviews:

Related manuals for BU SERIES

Brands by name

Popular brands