Toshiba BMS-TP0640ACE, Manual

Page: 56 / 104

56
4-1 Address setting flow
Setting flow
Power ON
Contents Reference No.
Manual address setting
Line address setting
Indoor units/Outdoor units
Setting from main wired remote controller
(Line/Group/Indoor address setting)
Dip Switch setting on outdoor interface
P.C.board
Power reset to activate line address
7 segment display on outdoor interface
P.C.board check line/indoor address on
remote controller
Test operation in each refrigerant
system one by one
4-3-1 (1)
Power reset
Indoor unit address check
Trial operation (Refrigerant system)
Setup of relay connector and SW30-2
Central controller exist ?
Central control device setting
Trial operation (Central control device)
TCS-NET control system address setting
Local server
TCS-NET relay I/F
Energy monitoring relay I/F
Digital I/O relay I/F
Central control wiring and terminator
setting
Local central remote controller setting any
(Central remote controller, ON/OFF
controller, etc)
Test for local central control device
Switch setting
CF (Compact Flash) card mounting
4-3-1 (2)
4-3-1 (3)
4-3-1 (4)
4-3-1 (5)
4-3-1 (6)
4-3-1 (7)
4-3-1 (8)
4-3-1 (9)
4-4
Chapter. 5
Trial operation for Touch panel controller Operation from touch screen controller