Toshiba BMS-TP0640ACE, Manual

Page: 39 / 104

39
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
REQUIREMENT
Intelligent Server Installation Method and Orientation
There are four ways to install the Intelligent Server as shown below: (1) rack mount (2) surface mount (3)
wall mount A, and (4) wall mount B. The rack mount installation requires a support bracket for a 19-inch
rack. Please contact us if you need the support bracket.
Use the four bottom screw holes for the wall mount installation.
(4)Wall mount -B
Wall mount with the left side upward
(1)Rack mount
A support bracket is required to be
fixed to the bottom (rear side) of the
unit.
(2)Surface mount
Standard installation
(3)Wall mount -A
Wall mount with the front side upward
308.4 30.8 30.8
30
133
35
Screw hole for wall
mount (M4 × 4 pcs.)
(Unit: mm)
AC inlet side
LED side