No. 2B771-004EN*M
15-2
Continuous playback (loop) mode
Setting the loop range for frame-by-frame playback
NOTE:
1. When both images are frozen in 2D dual display mode, cine processing is
applied to the image for which the cine icon and the character "T"
indicating the scanning direction are brighter. To change the target, press
.
2. Auto data displayed on an image played back from the cine memory
The auto data displayed on an image played back from the cine memory
reflects the values at the time at which the image was frozen. Note this
when you save an image.
3. Images in the cine memory may be lost due to setting changes. The
necessary data should be recorded on storage media such as an HDD
using the Clips function or other means as required.
4. Up to 2700 image frames can be played back from the cine memory.
When more than 2700 image frames are in the cine memory, the 2700
frames preceding the time the image is frozen are played back.
*
Summary of Contents for Aplio 500 TUS-A500
