Toshiba Aplio 500 TUS-A500 Operation Manual Download Page 138

Page: 138 / 232

No. 2B771-004EN*M

14-32

14.6.3 Adjustment using the touch panel

<<Display example>> Exam Type:

[Adult Heart]

, Transducer: PST-30BT

Function

[Sub Preset]

Displays created sub presets.

Turns the M/D cursor display ON/OFF in single display mode.

Displays monochrome and color images simultaneously in real-
time.

Used to correct the angle relative to the Doppler beam.

Used to change the width of the sampling gate.

Used to adjust image colors.

Used to adjust sensitivity for low-velocity tissues.

Used to adjust the degree of reduction of motion artifacts.

Used to adjust the color image quality and the number of frames.

Used to adjust velocity scale of tissues.

Used to select transmission/reception frequency.

Used to adjust the low-speed color display level.

Used to adjust frame interpolation.

Used to adjust spatial smoothness of the image.

Summary of Contents for Aplio 500 TUS-A500









































































































































































































































Search results

Summary of Contents for Aplio 500 TUS-A500

Reviews:

Related manuals for Aplio 500 TUS-A500

Brands by name

Popular brands

Toshiba Aplio 500 TUS-A500, Operation Manual

Search results

Summary of Contents for Aplio 500 TUS-A500

Reviews:

Related manuals for Aplio 500 TUS-A500

Brands by name

Popular brands