Toshiba Aplio 500 TUS-A500, Operation Manual

Page: 117 / 232

No. 2B771-004EN*M
14-11
STC setting and automatic update function setting
(1) The STC slider positions when is pressed are set as the center values
for the adjustment ranges. The movement range over which adjustment is
possible depends on the position when is pressed as illustrated in the
figures below.
Adjustment range when the
sliders are at the center Example of adjustment range
when the sliders are not at the
center
(2) The changed offset can be saved or reset using the following switch in the
[OTHER] menu on the touch panel:
: Saves the offset.
: Returns the saved offset to the original setting.
(3) Quick scan is automatically updated when any changes are made to the STC
settings. Note that the automatic update function can be disabled from the
[Preset] menu (refer to the operation manual Applications volume,
subsection 22.2.1, for details).
If automatic updating is disabled, the changed STC settings are valid until
is pressed.