Toshiba Aplio 500 TUS-A500, Operation Manual

Page: 93 / 232

No. 2B771-004EN*M
13-5
Operations from the touch panel ( [OTHER] tab menu)
[OTHER] page 1/3
No. Switch Function
<1> Resets the settings of Scan Range, Color ROI, and Doppler
range gate position in 2D mode or volume display in 4D
mode to the initial values during measurement or imaging.
<2> Displays the cursor on the monitor.
<3> Used to select the image zooming method (Center or Spot).
* Refer to subsection 14.1.4 for details.
<4> Displays the [PHYSIO] menu.
<5> Used to adjust the brightness and contrast of the touch
panel.
* Press the corresponding knob to toggle the label of this
switch between [TCS Brightness] and [TCS Contrast] .
<6> Used to adjust the volume and tone of the beep that is output
when a switch on the main panel is pressed.
* Press the corresponding knob to toggle the label of this
switch between [Panel Beep Volume] and [Panel Beep
Tone] .
<7> Used to adjust the volume and tone of the beep that is output
when a printing, storage, or video recording operation is
performed.
* Press the corresponding knob to toggle the label of this
switch between [Output Beep Volume] and [Output
Beep Tone] .
<8> Switches the exam image display area on the monitor
(normal/expand).