No. 2B771-004EN*M
14-8
14.1.4 Selection of image zooming method
The image zooming method can be selected using the
[Zoom Method]
switch in the
[OTHER]
menu. When the Zoom mode is ON, however, the
[Zoom Method]
switch
cannot be operated.
Zooming the image around the center of the image (Center Zoom)
(1) Confirm that "Center" is displayed on
in the
[OTHER]
menu (the
initial setting is "Center").
(2) Zoom
the
image.
(a) Zoom
the
image.
: Rotate the dial.
(b) Pan the image.
: Operate the trackball.
(3) Pressing
the
[DEPTH/ZOOM]
dial again resets the panning/zooming
operation and returns the image to the depth (size) that was set before the
image was zoomed.
Summary of Contents for Aplio 500 TUS-A500
