22
En
gli
sh
SETTING UP YOUR TV
x
If the reception testing completes successfully, the
Auto Tuning
startup screen will display.
You can select
Search Option
from
Free to Air
or
All
.
When choosing the search option
All
, all channels
(including encrypted ones) of the satellite will be
searched for. If you wish to only search for
unencrypted (free) channels, please select
Free to
Air
. In this case, the channel scan will be
completed faster.
y
Press
b
to highlight
Start Scan
, and press
OK
.
The television will start to search for available
DVB-S
channels. The progress bar will indicate
the scan status.
When the search is complete, the
Auto Tuning
results screen will display the total number of
services found.
z
Use
B
/
b
to move through the list to select a
channel, and then press
OK
to view.
From this menu, you can set the RF input configuration.
a
Press
and
B
/
b
to highlight
Installation
icon.
b
Press
c
and
B
/
b
to select
Channel
Tuning
and
press
OK
.
c
Press
B
/
b
to select
Ant/Cable/Satellite
and
press
OK
.
d
Press
B
/
b
to select
Antenna
,
Cable
or
Satellite
.
e
Press
B
/
b
to highlight
Next
and press
OK
.
NOTE:
When you attempt to change the
Ant/
Cable/Satellite
setting, a warning message will
appear followed by PIN entry (if PIN has been set)
and a prompt for
Auto Tuning
.
f
When
Ant/Cable/Satellite
is set to
Cable
, the
following setting options will be provided in the
Auto Tuning
screen.
Press
B
/
b
to select an item and press
c
and
B
/
b
to select your desired option.
With the exception of
DTV Scan Type
and
DTV
Modulation
items, all of the following items will have 2
operating modes. The first is
Auto
where the values for
each item are preset by the system. The second is an
Input
mode where you will be able to enter a single value
in place of the pre-set value. If no channel is currently
tuned and the
Input
state is chosen, a system default
value will be shown. However, if a channel is currently
tuned when the item is accessed, the value of the current
channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country
you set.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full
Scan
will be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item
is greyed out when DTV Scan Type is set to “Full Scan”.
PLEASE NOTE
The
Quick Setup
menu can also be accessed at
any time from the
Installation
menu.
Ant/Cable/Satellite
Scan Type
Fast Scan
Search Option
Free to Air
Auto Tuning - Satellite
Start Scan
Tuning Mode
DTV and ATV
Auto Tuning - Cable
Start Scan
DTV
Operator Selection
Others
Scan Type
Quick Scan
Start Frequency
Auto
End Frequency
Auto
Modulation
Auto
Symbol Rate
Auto
Network ID
Auto
