21
Eng
lis
h
SETTING UP YOUR TV
Once you have selected a satellite, you can
change further settings under
Dish
and
LNB
.
Press
OK
and
C
/
c
to select
Dish
or
LNB
and
press
GREEN
button.
Under
Dish
you choose the dish type that will be
used (fixed or moveable dish). The majority of
households have a fixed satellite dish.
LNB
allows you to determine the lower and higher
Local Oscillator Frequency (LOF). Usually, the
factory settings do not need to be changed. You
can find the parameters of the lower and higher
LOF on the specification sheet of your LNB.
Press
B
/
b
to highlight
Done
and press
OK
.
w
If your satellite dish is moveable, the following
Positioning
screen will appear.
Press
B
/
b
to highlight
Positioning
, and then
press
C
/
c
to find the dish position with the
strongest signal level.
Press
B
/
b
to highlight
Store Position
and press
OK
to store the dish position. Repeat steps 22 and
23 for the next satellite as necessary.
Adjust the dish position manually for the maximum
Signal Level strength. The signal level strength is
displayed from 0 % to 100 %. A high signal level
can be achieved by adjusting the satellite dish the
best way possible.
Press
B
/
b
to highlight
Done
and press
OK
.
If you select
Single Cable
in step 22, the
Single
Cable Settings
screen will appear. You can set
the appropriate value for each item and highlight
Done
.
1
Astra 19.2E
1
1
2
3
4
Satellite Settings
Switch Type
LNB Power
None
On
No.
Satellite
Dish
LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
1
Astra 19.2E
1
1
2
3
4
Satellite Settings
Switch Type
LNB Power
None
On
No.
Satellite
Dish
LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
Transponder
Go to 0
Go to Stored Position
Step Size
Positioning
Positioning
Satellite : Astra 19.2E
Signal Level
30%
Store Position
1/120 (10729 MHz V (R))
1
W
E
Signal Level
30%
User Slot Number
0
User Slot Frequency
1284
Password PIN
None
Single Cable Settings
Done
Verify Slot Frequency
