Toshiba 42LX177 - 42" LCD TV, Owner'S Manual

Page: 65 / 118

65
LX177 (E/F) Web 213:276
Chapter 6: Using the TV’s features
To listen to a second audio program on an analog
station (if available):
Select
SAP
in step 3 on the previous page.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal
audio will be output. However, occasionally there is no
sound at all in
SAP mode. If this happens, set the MTS
feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1
Press
Y
and open the Audio menu.
2
Highlight Audio Settings and press
T
.
3
Press
b
or
B
to highlight the item you want to adjust
( Bass , Treble , or Balance ).
4
Press
C
or
c
to adjust the level.
•
C
makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
•
c
makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5
To save the new settings, highlight Done and press
T
.
To reset the settings to the factory defaults, highlight
Reset and press
T
.
Using the StableSound ® feature
The StableSound
®
feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound
®
feature:
1
Press
Y
and open the
Audio
menu.
2
Highlight Audio Settings and press
T
.
3
In the StableSound field, select On .
4
To save the new settings, highlight Done and press
T
.
To revert to the factory defaults, highlight Reset and
press
T
.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . center (50)
Treble . . . . . . center (50)
Balance . . . . . center (0)
StableSound . . Off
To turn off the StableSound feature:
Select
Off
in step 3 above.
Done
Audio Settings
Bass 100
Treble
Reset
100
0 Balance
StableSound Off
Done
Audio Settings
Bass 100
Treble
Reset
100
0 Balance
StableSound On
42LX177_EN.book Page 65 Tuesday, May 15, 2007 1:58 PM