Toshiba 32PX200 series, Owner'S Manual, Page: 22 / 59

22
Using the TV’s features
2
Press

or

to select On or Off .
Activating Auto Brightness Sensor
When the Auto Brightness Sensor is activated, it
will automatically optimise the backlighting levels
to suit ambient light conditions.
1
From the Advanced Picture Settings menu,
press

or

to select Auto Brightness
Sensor .
2
Press

or

to select On or Off .
Resetting the Advanced Picture Settings
This feature allows you to reset the current Advanced
Picture Settings to the default values.
1
From the Advanced Picture Settings menu,
press

or

until Reset is selected.
2
Press OK .
3
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
Press MENU , and then press

or

to display
the SOUND menu.
0
MTS
Dual Dual 1
Off
Balance
Advanced Sound Settings
Stable Sound
Auto
On Dynamic Range Control
SOUND
2
Press

or

to select MTS , and then press

or

to select Auto or Mono .
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the
MTS mode to
Mono .
Noise will be reduced and reception may improve.
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Red ,
Green , Blue , Yellow , Magenta or Cyan .
1
From the Advanced Picture Settings
menu, press

or

to select 3D Colour
Management .
2
Press

or

to select On .
3D Colour Management On
3
Press

or

to select Base Colour
Adjustment .
4
Press OK , then press

or

to select an item
you want to adjust.
Base Colour Adjustment
Hue Saturation Brightness
Red 0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Green
Blue
Yellow
Magenta
Cyan
Reset
5
Press

, then press

or

to select Hue ,
Saturation or Brightness .
6
Press

or

to adjust the settings as required.
Hue Saturation Brightness
Red 0 0 0
Note:
If you select 3D Colour Management Off mode, this
mode is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press

or

to select Reset .
2
Press OK .
3
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the Advanced Picture Settings menu,
press

or

to select Active Backlight
Control .
324046PX200̲Series̲En.indd 22 2012/06/04 13:21:48