Toshiba 32PX200 series, Owner'S Manual, Page: 21 / 59

21
Using the TV’s features
Resetting the Picture Mode
This feature resets all picture settings to the factory
settings.
Note:
If no picture settings have been changed, Reset is not
available.
1
From the PICTURE menu, press

or

to
select Reset , and then press OK .
2
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Activating the picture preferences
You can customise current Picture Mode settings as
desired. For example, while selecting " Dynamic ", if
you change the following items, such as Backlight ,
Contrast , Brightness , Colour , Tint , Sharpness , and
the Advanced Picture Settings items, your new
setting are saved for " Dynamic " Picture Mode .
1
From the PICTURE menu, press

or

to
select either Backlight , Contrast , Brightness ,
Colour , Tint or Sharpness .
2
Press

or

to adjust the settings as desired.
Setting the Contrast Booster
Contrast Booster improves the defi nition of dark
areas of the picture.
1
From the PICTURE menu, press

or

to
select Advanced Picture Settings .
2
Press

or

to select Contrast Booster .
PICTURE
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor
Active Backlight Control
Noise Reduction
Cinema Mode
3D Colour Management
Advanced Picture Settings
Off
Off
On
On
Contrast Booster Middle
3
Press

or

to select Middle , High , Off or
Low .
Using the Cinema Mode
This feature will reduce picture blur without
decreasing image brightness or adding fl icker.
1
From the Advanced Picture Settings menu,
press

or

to select Cinema Mode .
2
Press

or

to select On or Off .
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the Advanced Picture Settings menu,
press

or

to select Colour Temperature ,
then press OK .
2
Press

or

to select Cool , Natural , or Warm
to suit your preference.
Colour Temperature
Colour Temperature Cool
Red Level
Green Level
Blue Level
Reset
0
0
0
3
Press

or

to select Red Level , Green Level
or Blue Level , then press

or

to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temparature
settings to the factory settings.
1
From the Colour Temperature menu, press

or

to select Reset , then press OK .
2
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
From the Advanced Picture Settings menu,
press

or

to select Noise Reduction , and
then press OK .
Noise Reduction
Auto Clean On
MPEG NR Auto
DNR Auto
2
Select Auto Clean , and then press

or

to
select On or Off .
Off mode :
MPEG NR
menu and DNR menu are available.
• MPEG NR mode: Low , Middle , High or Off
• DNR (Digital Noise Reduction) mode: Low ,
Middle , High or Off
324046PX200̲Series̲En.indd 21 2012/06/04 13:21:48