Troubleshooting
EN
DE
page 52 / 117
Error
Cause
Checking/correction
Battery does not charge
Starter key and Emergency Stop Switch
Check that the starter key is set to position 0 and that the fuse
of the Emergency Stop Switch is pushed on before inserting the
charger plug into the socket.
Increased generation of noise and vibration in
the electrical drive system.
Contact Torqeedo Service or an authorised Service Partner.
For any error which is not listed, and for any error which cannot be corrected through the measures described above, contact Torqeedo Service or an authorised Service Part-
ner.
ADVICE
If the "Insulation fault" error message appears in the display, the insulation of the high-voltage system is damaged. The DEEP BLUE system remains in running order, but
it must be inspected immediately by Torqeedo Service. Because of the linked safety systems of the DEEP BLUE system, two insulation faults must exist simultaneously for
there to be a risk of injury. After warning of an insulation fault, avoid contact with metallic parts.
