Operation
EN
DE
page 34 / 117
Activate/deactivate Remote Service
Enabled:
Remote Service is switched on
Disabled:
Remote Service is switched off
Connection status of router
Green:
Connection to the router installed on the boat can be established
Red:
Router switched off or defective, network cable or system controller
defective
Connection status of Internet
Green:
Connection to Internet has been established
Red:
Internet connection not available, or test server does not respond
Connection status of Torqeedo server
Green:
Connection to the Torqeedo server has been established
Red:
Internet connection not available, or Torqeedo server does not re-
spond
Status of VPN connection of Torqeedo server
Available:
VPN connection to the Torqeedo server has been established
Not Available: Internet connection not available, Torqeedo server does not re-
spond, or router is not configured correctly
ADVICE
The green/red buttons display the status of the respective request. In order to
ensure that the connection is permanently established, the request must be re-
peated. In order to reduce the use of data volumes, Torqeedo does not use an
automatically permanent request.
Perform connection test
The output status of the connection test is
update
.
In order to perform the connection test to the Remote Service, press the
Perform
connection test
button.
While the connection test is being performed, the status remains at
pending
.
As soon as the connection test is complete, the status changes back to
update
.
The results of the connection test are displayed below (3-6).
