Operation
DE
EN
page 41 / 117
6.5.3 End trip
Sail accelerator lever with side mounting
Move the lever back to the neutral position and press the On/Off switch in order to
switch off the complete system.
Throttle lever with side mounting and throttle lever with top mounting
Move the lever back to the neutral position and turn the key fully to the left in order
to switch off the complete system.
Double accelerator lever with top mounting
Move both levers back to the neutral position and turn the key fully to the left in or-
der to switch off the complete system.
ADVICE
During breaks in a trip, if there are swimmers near the boat:
Ensure that the system is switched off, in order to prevent unintentional opera-
tion of the remote throttle.
ADVICE
At the end of a trip, follow the instructions in
Chapter 8.4, "Storage"
.
6.6 Charging the high-voltage batteries
DANGER!
Danger of fire and burns from overheating or from hot surfaces on the
components.
Fire and hot surfaces can result in death or severe physical injuries.
■
Do not store flammable objects in the area of the high-voltage equipment.
■
Use only charging cables which are suitable for outdoor use.
■
Always unroll the cables completely.
■
If the DEEP BLUE system becomes very hot or you see steam or smoke,
switch the system off immediately.
■
During or immediately after a trip, do not touch any of the motor or battery
components.
■
Prevent strong mechanical forces from working on the batteries and cables
of the DEEP BLUE system.
Prerequisites:
■
The fuse for the Emergency Stop Switch must not be removed.
■
The Emergency Off Switch must not be depressed.
1. To start the charging process, insert the charger plug into the provided socket
ashore.
The charging process starts automatically.
If the system is switched on, then the displays switch on automatically. If the
system is switched off, only the display for the accelerator lever is switched
on.
As soon as AC voltage is detected at the plug, an icon is displayed on the
Drive screen.
An arrow and the combined charging power of all charger units are displayed
on the Energy Flow screen.
A plug symbol and the charging power are displayed on the accelerator lever
display.
