Microzone Number
51
The
Microzone
number identifies the location of the controller
The default number will be initially displayed. During ET
Everywherer service activation, the actual microzone number
will be automatically downloaded.
and enables it to receive specific ET Everywhere data. This number
is downloaded automatically during the ET Everywhere service
activation.
Phase Integrity
PHASE INTEGRITY *
A=00 B=00 C=00 D=00
Lock Phase
Note:
At the time of ET Everywhere Service activation, you will be
assisted by a WeatherTRAK customer support representative in the
Lock Phase selection procedure. Do not change the default setting
until that time.
1.
Within the
Help
menu, turn the
Upper Line
knob to view the
following display:
1.
Within the
Help
menu, turn the
Upper Line
knob to view the
following display:
1.
Within the
Help
menu, turn the
Upper Line
knob to view the
following display:
2.
Turn the
Lower Line
knob to select the appropriate Phase
identifier (A, B, C, D or None).
MICROZONE
12345678
The controller will begin acquiring signal strength data which
will be displayed next to each of the identifiers (A, B, C and D).
This information will be used during the initial ET Everywhere
setup process to identify the strongest signal.
LOCK PHASE
None
