Troubleshooting Guide
A
Appendix A
63
1.
Turn the
Function Selector
knob to
ADJUST
.
2.
Turn the
Upper Line
knob to select a station.
3.
Turn
Lower Line
knob to 5% and watch for 7 to 10 days.
4.
If your landscape is still too dry, increase 5% each week until
stress is eliminated. This is the optimal level.
1.
Turn the
Function Selector
knob to
RUN
.
4.
Turn the
Function Selector
knob to
HELP.
.
5.
Turn the
Upper Line
knob select
BEEP on MESSAGE?
from the
Help
menu.
6.
Turn the
Lower Line
knob to select
No
.
7.
Turn the
Function Selector
knob to
RUN
.
2.
Make sure the date and time settings are correct.
3.
The landscape is too dry.
The landscape is too wet.
The controller continues to “Beep.”
1.
Turn the
Function Selector
knob to
ADJUST
.
2.
Turn the
Upper Line
knob to select a station.
3.
Turn the
Lower Line
knob to adjust -10% and watch your
landscape for 7 to 10 days.
4.
If your landscape is still too wet, decrease 5% to 10% each week
until you see minor stress in you landscape.
5.
When you see minor stress in your landscape, increase 5%
to set program at optimal level.
Phase(X)(L)
(where X = the Phase identifier and L = Locked) will be
displayed. The
Beep on Message
alert tone option is automatically
turned
On
during the ET Everywhere activaton process. The alert tone
will automatically turn off at midnight.
