1.
2.
The default value is 24 stations. To change the number of active
Within the
Setup
menu, turn the
Upper Line
knob to view the
following display:
stations, turn the
Lower Line
knob.
Selecting the Master Valve Control Option
1.
W
By default, the Master Valve circuit is
Enabled
. To disable the
circuit, turn the
Lower Line
knob to select
Disabled
.
itihin the
Setup
menu, turn the
Upper Line
knob to view the
following display:
2.
Note:
The active station count entered in this step will also determine the
number of stations that can be accessed within the
Programming
,
Review
and
Copy
function procedures.
Operation of the Master Valve (MV) control circuit can be enabled
or disabled as needed. By default the MV circuit is enabled.
SET MASTER VALVE
Enabled
10
SET ACTIVE STATIONS
24 (MAX AVAILABLE=24)
Setting the Active Station Count
The actual number of stations being used for irrigation must be entered
to enable accurate automatic scheduleing. By default, 24 stations are used
in the scheduling computations.
Important:
than actual will add unnecessary time to the Water Window causing an
alert condition to occur. Setting the station count lower than actual will
prevent some stations from operating.
!
If the actual number of active stations is not entered, errors and low
controller performace can result. Setting the active station count higher
MV
