1.
Within the
Setup
menu, turn the
Upper Line
knob to view the
following display:
2.
STACKING
YES
SCH A Same Times
11
Selecting the Stacking Option
YES is selected by default. To disable the Stacking option,
turn the
Lower Line
knob to select NO.
When the
Stacking YES
option is selected, the controller will be
constrained to operate
one station at a time
. The Water Window
start time and duration selected for Automatic Schedule
A
will
also be assigned to Automatic Schedule
B
and
U
(User-defined)
Before selecting Stacking NO, ensure that the irrigation system
hydraulic capacity and the controller’s maximum current draw
capacity (1.25A) will not be exceeded if four stations and master
valve circuit are operated concurrently.
Important:
!
STOP
When the
Stacking NO
option is selected, the constraint is removed,
allowing up to four stations to operate at the same time. A separate
Water Window start time and duration can be set for all schedules.
This completes the Setup procedures required for controller operation.
The additional procedures on pages 12 and 13 are used exlcusively for
operation with the ET Everywhere service. If you elect to use the
subscription service, you will be guided through these procedures by
a WeatherTRAK customer support representative at the time of service
activation.
Continue now to Chapter 3 - Setting Up Watering Schedules, begining
on page 15.
schedules.
