Figure 14
The parking brake may not hold the
machine parked on a slope and could
cause personal injury or property
damage.
Do not park on slopes unless the wheels
are chocked or blocked
Releasing the Parking Brake
Push forward and down on the parking brake lever
to release the parking brake (Figure 14).
Figure 15
Starting and Stopping the
Engine
Starting the Engine
1. Raise the roll bar up and lock it into place, sit
on the seat, and fasten the seat belt.
2. Ensure that the motion controls are in the
neutral locked position.
3. Set the parking brake; refer to Setting the
Parking Brake.
4. Move the PTO (power take off) switch to the
off position (Figure 16).
Figure 16
1. Ignition switch
3. Glow plug light
2. Throttle control
4. Power take off switch (PTO)
5. Move the throttle lever midway between the
Fast and Slow positions (Figure 16).
6. Turn the ignition key clockwise to the Run
position (Figure 17).
The glow plug light will turn on for 6 seconds.
Figure 17
1. Ignition switch
3. Run/glow pug
2. Off
4. Start
7. After the glow plug indicator light goes out,
turn the key to the Start position. When the
engines starts release the key.
29
Summary of Contents for Groundsmaster 7200 Series
Page 9: ...Slope Chart 9 ...
Page 44: ...Figure 39 44 ...
Page 70: ...Schematics Electrical Schematic Rev A 70 ...
Page 71: ...Hydraulic Schematic Rev A 71 ...
