Toro 41188, Service Manual

Page: 112 / 353

Multi Pro 1750
Page 5 − 10
Electrical System
Main Information Screen
The InfoCenter main information screen is displayed
about 10 seconds after the ignition switch has been
turned from the OFF position to the ON or START posi-
tion (Fig. 11). The main information screen is the “de-
fault” screen as it will be displayed during normal
machine operation. The main information screen pro-
vides the following information to the operator:
S
Vehicle speed
S
Spray system application rate
S
Spray tank volume
Icon appears when a spray tank volume grater
than zero (0) is entered
S
Parking brake
Icon appears when parking brake is engaged
S
Master boom
Icon (all three booms) appear across the top of
the screen when master boom switch is ON
S
Boom sections
Icon (boom with spray pattern) appears when
master boom switch is ON and one or more spray
boom switches are ON
S
Hill Assist
Icon appears when hill assist is enabled and
engaged
S
Throttle Lock
Icon appears when throttle lock is active
S
Speed Lock
Icon appears when speed lock is active
Press any button once to expose the navigation pane at
the bottom of the screen. The navigation pane will close
automatically if another button is not pressed within five
(5) seconds. Press the center, left or right buttons when
the navigation pane is exposed to access additional
screens and menus.
1. Vehicle speed
2. Application rate
3. Spray tank volume
4. Parking brake (applied)
5. Master boom (active)
6. Spray boom (active)
7. Throttle lock (active)
8. Speed lock (active)
9. Hill assist (active)
10. Left/back button
11. Center/down button
12. Right/forward button
13. Navigation pane
Figure 11
1
10
11
12
5
gal/Ac
0
MPH
36 gal
2
6
4
3
13
gal/Ac
0
MAIN INFORMATION SCREEN
MAIN INFORMATION SCREEN
(NAVIGATION PANE EXPOSED)
7
0.0
gal/Ac
0
MPH
36 gal
9
8
0.0