tornos MultiAlpha 6x32, Safety Instructions

Page: 31 / 90

Safety instructions MultiAlpha 6x32 - 3. Work environment
300940 en - 03/11 3-3
3.3.1. Oil spray and fume extractor
3.3.1.1 Use
Danger !
Based on the type of machining applied to the machine, the release of vapour
and fumes may be significant. It is highly recommended in all cases to install a
fume and oil spray extraction system.
All TORNOS SA machines are equipped with a connection for a fume and vapour
extractor or collector.
Caution !
Despite installation of the fume extractor, the treatment system may be insuffi­
cient during heavy release of fumes.
Mandatory !
The user must carefully read and strictly follow the manufacturer's instructions.
3.3.1.2 Safety rules to comply with during installation
Mandatory !
During installation of a fume or vapour collector or extractor, the fitting diameter
must not be modified for any reason (constriction or plugging forbidden).
Scrupulously comply with the technical specifications and instructions; siphoning
effect to forbid = accumulation of condensate.
Caution !
The filter must be able to operate constantly while the machine is on..
It must not be connected so that it operates according to the machine cycles
or intermittently.
Caution !
The entire oil spray extraction system or fume filter (options 5430 to 5434) must be
equipped with a shut-down system compatible with the fire-fighting device
(check valve or motor brake connected to the machine emergency stop, this is
under the responsibility of and at the expense of the buyer).
TORNOS SA supplies compatible systems.
Danger !
Make sure the motor rotates in the right direction. Check the rotating field.
Attention !
Make sure the device is at a complete standstill and disconnected from the elec­
tricity supply before opening the cover.