tornos MultiAlpha 6x32 Safety Instructions Download Page 15

Page: 15 / 90

Safety instructions MultiAlpha 6x32 - 1. Generalities

300940 en - 03/11

1-3

1.6.

Definition of pictograms

1.6.1.

General pictograms

Note !

Warning and danger pictograms are used in this manual and on the machine.
They indicate safety instructions, providing safety related information:

-for the control and safe use of the machine by exposed persons, the
operators,

- as well as for the environment and the machine.

The user is required to respect and ensure these safety instructions are respected.

If the regulations in the country of installation are stricter, the latter apply.

Note !

The danger level is determined according to the following rule:

1 = Light danger.
2 = Minor danger.
3 = Average danger.
4 = Major danger.

Summary of Contents for MultiAlpha 6x32



























































































Search results

Summary of Contents for MultiAlpha 6x32

Reviews:

Related manuals for MultiAlpha 6x32

Brands by name

Popular brands

tornos MultiAlpha 6x32, Safety Instructions

Search results

Summary of Contents for MultiAlpha 6x32

Reviews:

Related manuals for MultiAlpha 6x32

Brands by name

Popular brands