tornos MultiAlpha 6x32, Safety Instructions

Page: 30 / 90

3. Work environment - Safety instructions MultiAlpha 6x32
300940 en - 03/11
3-2
3.1. Order and cleanliness
Warning !
Order and cleanliness around the machine are key factors for safety. Danger of
slipping, falling and injury.
- clean the floor around the machine regularly;
- remove all grease spots, oil stains, etc...;
- no tools or other objects should be left lying on the floor or on workstations;
- clean the interior of the machine regularly.
3.2. Conditions of use of the machine
Characteristics
Name Unit Value
Maximum ambient humidity
% 79
Ambient temperature of the workplace
°C 5-35
Relative temperature
°C +/- 15
Caution !
All devices are used within the tolerances not reaching and not exceeding the
limits of their operating specifications.
3.3. Oil spray and fume extraction
Caution !
Ensure the correct functioning of fans and their regular cleaning (grills and filters).
Pay special attention to the fans of motors in the machining area.
Info !
The premises where the machine is installed must be adequately ventilated.
Mandatory !
Observe the regulations in force in the country of installation.