tornos MultiAlpha 6x32, Safety Instructions

Page: 58 / 90

5. Machine use - Safety instructions MultiAlpha 6x32
300940 en - 03/11
5-20
START
Starting conditions: Power on.
Select the "CONTINUOUS CYCLE" mode or
"SETTING" mode.
If you open the doors in that instant, the
power is immediately disconnected.
Press "F1" to unlock the machining doors in
SETTING mode.
The "F1" key lights up, indicating the doors
are unlocked.
After 15 seconds, the doors are locked
again. The "F1" key is turned off. Press “F1”
to open the doors again.
If, at that instant you turn the safety key from
the "SETTING" mode to the "CONTINUOUS
CYCLE" mode, the power is cut off.
Manual modes
CONTINUOUS
CYCLE
SETTING
Opening of
doors in loading
and unloading
zones
The power is
cut off
Opening machining
doors possible
15 seconds
Automatic modes
1
2
Fig. 17