tornos MultiAlpha 6x32, Safety Instructions

Page: 60 / 90

5. Machine use - Safety instructions MultiAlpha 6x32
300940 en - 03/11
5-22
2
Manual modes
Select the "JOG" mode
to feed the axes at the
maximum speed of 2
m/min.
Select the "Incremental"
mode to feed the axis
step by step.
JOG
Incremental
References
3
or
4
Use of the manual controls is authorised in the conditions with
the following restrictions:
With hold to run pressing on a key, the movement in "JOG+"
and "JOG-" at reduced speed (2 m/min.) is authorised for one
axis; combined movements with at least 2 axes are not
allowed.
The spindle and turning tools rotation speed is limited without
hold to run action.
The opening and closing movement of the part pickoff
devices are possible.
See the list of MDI controls authorised with the doors open in
the operating instructions.
Keep the key "Cycle Feed" + or - pressed.
Return to the
CONTINUOUS CYCLE
Fig. 19