©2020 TopXGun (Nanjing) Robotic Ltd,.Co Copyright owner
12
1.1.5.
Frequency-matching Instruction
When the complete set of drone is purchased, the remote control transmitter and the
drone have been frequency-matched before dispatching, and can be used directly after
power-on. In other cases, use the following methods to match the frequency:
1.
Turn on the remote control parameter adjustment assistant, as shown below
2.
Click the "Start Frequency Matching" button, the indicator light of the remote control
will be light green flashing. APP shows a pop-up of “frequency matching” and there is
a 30s time limit to turn on the remote control. The receiver turns from green flashing
to solid green, and the remote control quickly beeps for 4 times to show frequency
matching is successful.
3.
Use a sharp tool (e.g. a pen, etc.) to press the receiver's Frequency Matching button
for 3s and release it to complete the frequency matching. After successful
matching , the remote control indicator indicator will be solid green. If the frequency
button is not pressed within 30 seconds, “Frequency Matching failed”will be
displayed.