©2020 TopXGun (Nanjing) Robotic Ltd,.Co Copyright owner
11
Solid Green
RC is connected to the drone
properly
ON
Light Green Flash
RC is pairing
ON
Green Flash
RC temperature is too high
ON
Red Flash
RC is in low battery
ON
Blue Flash
The control stick is not in the
middle position
ON
Solid Red
Charging and the battery level is
less than 10%
OFF
Solid Yellow
Charging and the battery level is
between 10% and 90%
OFF
Solid Green
Charging and the battery level is
over 90%
OFF
1.1.4.
充电示意
1. AC power supply 100-240V 2. USB charger 3. USB-C cable
Attention please:
1. Please use the Type-C interface to charge the remote control.
2. Fully charged for about 3.5 hours with the designated quick charger.
3. Please use the official charger when charging the remote control. If not , it is
recommended to use an FCC/CE-compliant, 5V 2A charger or a 9V 2A fast charger
that complies with the QC2.0 protocol.
4. To ensure the best condition of the battery of the remote control, please make sure to
fully charge the remote control every 3 months.
5. If the remote control is found to have peculiar smell, smoke or liquid leakage, etc.,
stop charging and send the remote control back for testing and identification in time.
6. Do not charge the remote controller when the ambient temperature exceeds 60
℃
.
7. Keep away from areas that babies and toddlers can touch while charging. It is
recommended not to leave it unattended.
