©2020 TopXGun (Nanjing) Robotic Ltd,.Co Copyright owner
48
Solution" and then you can start the operation .
2.5.7.3. RTK Base Station Setting
Step1：
Turn on the base station and wait when RTK is connecting to the satellites .
Step2：
Click the satellite status in the top bar of the main interface to enter the RTK
setting interface.
Step3：
Click the connection button in the status bar of the base station and select the
Bluetooth address of the corresponding RTK base station.
Step4：
After successful connection, click the configuration button to choose either of
the following two modes:
A.Marking mode: accurately map of the plot;
B. Base station mode: provide precise positioning service for the drone in
operation;
Step5：
After selecting the mode, the RTK system can work normally when “Fixed ”is
displayed.
Notes
：
1. Please make sure the base station is level when setting up the base station and
ensure that the height is higher than the plants in the operating area.
2. Do not move the base station during the drone is in operation.
3. In order to ensure the signal quality, it is suggested that the antenna of the base
station point to the sky and keep perpendicular to the ground.
4. In order to ensure the communication quality between the base station and the
aircraft, there must be no obstruction between the base station and the aircraft.
