©2020 TopXGun (Nanjing) Robotic Ltd,.Co Copyright owner
37
2.4.3.2. Operating Procedure
Step1：
Before taking off, click “
” button to start the testing spray, to check if there is
air in the pipeline.
Step2：
The drone takes off and flies to the field for operation.
Step3：
Press the spray button “ ” , and fly the drone to the filed and start the operation.
Notes:
1. During the operation, make sure that the drone is in the visual range.
2.4.4.
AB Point Mode
2.4.4.1. Mode Introduction
AB point operation mode is suitable for use in the regular area. It has fewer operation
steps. In the AB point operation mode, the drone can operate automatically after point A
and B are recorded. The spray will turn off automatically when the drone changes lines.
The flight route for AB point operation mode is shown in Figure 2-3-5.In the figure, the
dotted line length is the line spacing, which can be set in Plant Protection Assistant APP
according to the working conditions.
Figure 2- 3-5 AB point operation route
2.4.4.2. Operating Procedure
Step1.
After the drone took off, fly the drone to point A of the operating field, and click
the A Button. The Plant Protection Assistant APP will send a voice notification of
“point A is recorded successfully”.
Step2.
Fly the drone to the B point of the operating field, and click the B Button. The
Plant Protection Assistant APP will send a voice notification of “point B is recorded
successfully”.
Step3.
Click the AB Button. The Plant Protection Assistant APP will send a voice
notification of “point B is recorded successfully”.
Step4.
Toggle the remote control stick to the left/right to fly the drone to the direction of
Turning point
Spray width
