TOPSCCC EX-93821, Manual

Page: 95 / 123

Page 95
Init Display First [Onboard]
Use the
Init Display First
option to select the primary display device.
PCI Slot
The display connected to the PCI slot is the primary
display.
Onboard
(Default) The display connected to the onboard connector is the
primary display.
Reset Configuration Data [Disabled]
Use the
Reset Configuration Data
option to reset the Extended System Configuration
Data (ESCD) when exiting setup if booting problems occur after a new add-on is installed.
Disabled
(Default) ESCD will not be reconfigured
Enabled
ESCD will be reconfigured after you exit setup
Resources Controlled By [Auto (ESCD)]
Use the
Resources Controlled By
option to either manually configure all the boot and
plug and play devices, or allow BIOS to configure these devices automatically. If BIOS is
allowed to configure the devices automatically IRQs, DMA and memory base address
fields cannot be set manually.
Auto(ESCD)
(Default) BIOS automatically configures plug and play devices as
well as boot devices.
Manual
Manually configure the plug and play devices and any
other boot devices.
x IRQ Resources [Press Enter]
The
IRQ Resources
option can only be selected if the Resources Controlled By option is
set to Manual.