TOPSCCC EX-93821, Manual

Page: 48 / 123

EX-93821/EX-93823 Flat Panel PC
Page 48
Step 5:
Install the HDD into the EX-93821/EX-93823 by aligning the retention screw
holes in the base of the HDD brackets with the retention screw holes on the
platform. Insert the four retention screws.
Step 0:
3.9 Memory Module Installation
The flat panel PC embedded motherboard has one 200-pin SO-DIMM socket. To install
the SO-DIMM module, follow the instructions below.
Step 1:
Remove the back cover. See
Section 3.6
above.
Step 2:
Locate the SO-DIMM socket on the motherboard of the flat panel PC.
Figure 3-9: EX-93821/EX-93823 SO-DIMM Socket Location
Step 3:
Push the SO-DIMM chip into the socket at an angle. (See
Figure 3-10
)
Step 4:
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM module down. (See
Figure 3-10
)
Step 5:
Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM module in the socket.
Step 0: