TOPSCCC EX-93821 Manual Download

Page: 72 / 123

EX-93821/EX-93823 Flat Panel PC

Page 72

Disabled

Normal POST occurs after the computer is turned on.

Enabled

(Default)

Quick POST occurs after the computer is turned on.

Boot From LAN Control [Disabled]

Use the

BOOT From LAN Control

option to enable the system to be booted from a

remote system.

Disabled

(Default)

The system cannot be booted from a remote system

through the LAN.

Enabled

The system can be booted from a remote system

through the LAN.

Boot Device

Use the

Boot Device

options to select the order of the devices the system boots from.

There are three boot device configuration options:

First Boot Device

[Default: SCSI]

Second Boot Device

[Default: HDD-0]

Third Boot Device

[Default: CDROM]

Using the default values, the system first looks for a SCSI drive to boot from. If it cannot

find a SCSI drive, it boots from a HDD. If both The SCSI drive and the HDD are

unavailable, the system boots from a CD-ROM.

Boot Device configuration options are:

LS120

HDD-0

SCSI

CDROM

HDD-1

USB-FDD

Summary of Contents for EX-93821




























































































































Search results

Summary of Contents for EX-93821

Reviews:

Related manuals for EX-93821

Brands by name

Popular brands

TOPSCCC EX-93821, Manual

Search results

Summary of Contents for EX-93821

Reviews:

Related manuals for EX-93821

Brands by name

Popular brands