TOPSCCC EX-93821, Manual

Page: 86 / 123

EX-93821/EX-93823 Flat Panel PC
Page 86
EPP Mode Select [EPP1.7]
The
EPP Mode Select
option is only available if the
Parallel Port Mode
option is set to
EPP mode. Use the
EPP Mode Select
option to select the parallel port mode standard for
the parallel port.
EPP1.9
EPP 1.9 is selected as the EPP standard.
EPP1.7
(Default) EPP 1.7 is selected as the EPP standard.
ECP Mode Use DMA [3]
The
ECP Mode Use DMA
option is only available if the
Parallel Port Mode
option is set
to ECP mode. Use the
ECP Mode Use DMA
option to specify the DMA channel the
parallel port must use in the ECP mode.
1
The parallel port uses DMA Channel 1 in ECP mode.
3
(Default) The parallel port uses DMA Channel 3 in ECP mode.
Onboard Serial Port 3 [3E8]
Use the
Onboard Serial Port 3
option to select the I/O address for the onboard serial port
3. The serial port can be disabled or the I/O address can be automatically selected by the
BIOS. The
Onboard Serial Port 3
options are:
Disabled
3F8
2F8
3E8 (Default)
2E8
Serial Port 3 Use IRQ [IRQ5]
Use the
Serial Port 3 Use IRQ
option to select the IRQ for the onboard serial port 3. The
serial port can be disabled or the IRQ can be automatically selected by the BIOS. The
Serial Port 3 Use IRQ
options are: