TOPSCCC EX-93821 Manual Download Page 73

Page: 73 / 123

Page 73

USB-ZIP

USB-CDROM

USB-HDD

LAN

Disabled

Boot Other Device [Enabled]

Use the

Boot Other Device

option to determine whether the system uses a second or

third boot device if the first boot device is not found.

Disabled

The system does not look for second and third boot

devices if the first one is not found.

Enabled

(Default)

The system looks for second and third boot devices if the

first one is not found.

Boot Up Numlock Status [On]

Use the

Boot Up Numlock Status

option to specify the default state of the numeric

keypad.

Off

The keys on the keypad are not activated.

(Default)

Activates the keys on the keypad.

Gate A20 Option [Fast]

Use the

Gate A20 Option

to set if the keyboard controller or the chipset controls the Gate

A20 switching.

Normal

The keyboard controller does the switching.

Fast

(Default)

The chipset does the switching.

Summary of Contents for EX-93821




























































































































Search results

Summary of Contents for EX-93821

Reviews:

Related manuals for EX-93821

Brands by name

Popular brands

TOPSCCC EX-93821, Manual

Search results

Summary of Contents for EX-93821

Reviews:

Related manuals for EX-93821

Brands by name

Popular brands