TOPP DUEVILLE, Instructions For Installation And Use Manual

Page: 50 / 60

50
EN INSTRUCTIONS FOR INSTALLATION AND USE DUEVILLE
IT 7
have been applied and fulfilled,
in terms of their applicability, only for the above-described partly completed
machinery:
The above identified partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the above mentioned
Machinery Directive.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
that the relevant technical documentation is compiled in accordance with part B of Annex VII of the above
mentioned Machinery Directive.
EN 60335-2-103:2015 (applicable parts)
The following harmonised standards have been applied:
Variants: K140-K140E- K200-K200E-K280-K280E-K200T-K280T-DUEVILLE
Type: K
Variants: K140-K140E- K200-K200E-K280-K280E-K200T-K280T-DUEVILLE
Administrator ................................................
2006/42/EC Machinery Directive (including all applicable amendments)
The undersigned also undertakes the obligation, in response to a duly reasoned request by the national
market surveillance authorities, to transmit to the a.m. authorities, in electronic or paper format, the relevant
technical documentation on the partly completed machinery.
the following essential requisites of the
EN 16005:2012 (applicable parts)
Enclosure I: 1.1.2 a)-b)-c)-e), 1.1.3, 1.1.5, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.5.2, 1.5.4,
1.5.5, 1.5.6, 1.5.8, 1.5.10, 1.5.11, 1.5.13, 1.6.1, 1.6.2, 1.6.3, 1.7.3, 1.7.4;
Date: 31/10/2018 Signature: Sandrigo, Matteo Cavalcante
of the following company
The undersigned, in the name of and behalf
Topp S.r.l.
Via Galvani, 59
Italia
herewith declares that the person authorised to compile the technical file is
and that to the partly completed machinery
36066 Sandrigo (VI)
Name: Plaza Trinidad- Topp S.r.l.
Address:
via Galvani,59 36066 Sandrigo (VI)
ELECTROMECHANICAL AUTOMATION FOR LINEAR SLIDING
ORIGINAL
EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
RED Directive 2014/53/EU
and that the following harmonised standards have been applied:
The undersigned, in the name of and behalf of
the following company
Topp S.r.l.
Italia
herewith declares that the product
ELECTROMECHANICAL AUTOMATION FOR LINEAR SLIDING
Type: K
Variants: K140-K140E- K200-K200E-K280-K280E-K200T-K280T-DUEVILLE
Variants: K140-K140E- K200-K200E-K280-K280E-K200T-K280T-DUEVILLE
is in compliance with the following directives (including all applicable amendments):
Via Galvani, 59
36066 Sandrigo (VI)
RoHS II Directive 2011/65/EU
EN 300 220-2 V3.1.1
EN 50581:2012
EN 301 489-3 V1.6.1
Date: 31/10/2018 Signature: Sandrigo, Matteo Cavalcante
EN 61000-6-3:2007 + A1:2011 + AC:2012
EN 62233:2008
This declaration of conformity is issued under the sole responsibility of the manufacturer.
EN 61000-6-2:2005
and the following technical documents:
........................................................... Administrator
ORIGINAL
EU DECLARATION OF CONFORMITY