TOPP DUEVILLE, Instructions For Installation And Use Manual, Page: 5 / 60

Contact the installation technician or retailer for assistance.
1.5
SERVICING
IT
TECHNICAL DESCRIPTION
2
2.1
RATING PLATE AND “CE” MARKING
It should be applied by the installation technician in a clearly visible position on the outside of the automation unit.
The “CE” marking certifies the conformity of the machine to the essential health and safety requisites foreseen by the
European product directives.
It is formed of an adhesive plate made from polyester, screen-printed black, with the following dimensions: W=50mm -
H=36mm.
1.4
USER
Use of the automation must be exclusively permitted to users who comply with the instructions in this manual and in the
manuals of the TOPP devices connected to it.
The user must not open the casing or perform any operations restricted to maintenance personnel or specialized experts. In
case of breakdown or malfunction of the door, the user should simply switch off the circuit breaker and abstain from any
attempt to repair the system.
The user must be able to operate the automation under normal conditions and perform simple operations or startup or
resetting the automation following any forced interruptions, using the devices provided (digital switch, analogue switch, etc.).
2.2
PROPER USE
EN INSTRUCTIONS FOR INSTALLATION AND USE DUEVILLE
5
The door may be used in escape routes only if equipped with anti-panic break-through systems. It must be possible to break
through in the direction of escape no matter what the position of the door.
The DUEVILLE automation mechanism was designed and produced exclusively to operate (open and close) linear sliding
doors in residential, public and industrial buildings.
It is strictly forbidden to use the automation for purposes other than those described herein, in order to guarantee at all times
the safety of the installer and user and the correct function of the automation.
The automation software is designed to perform automatic recovery in the instance where anomalous
events as described in chapters 5.7-5.10.
The automation in order to perform the above, if set in a mode other than "Closed", perform a reset called "Near" that provides
for the complete opening and closing of the doors at a low speed, before returning in the set state the function selector.
The recovery action must be taken into account in applications where there are features that provide access
control with inputs different from those of the radar (example reader bedge) for which automation could not
ensure the operating mode set.
In case you want to exclude the auto recovery please contact support Topp Srl .