TOPP DUEVILLE, Instructions For Installation And Use Manual

Page: 8 / 60

2.5
MODELS
- automation with 2 door panels (Fig.2) which allows a pair of door panels to glide simultaneously in opposite directions;
Two models of automation are available:
@
When order a single door panel application, always specify the direction of opening of the door, seen from the front of the
automation.
The glide of the door panel VPA is equal to VL when the upright on the door does not have any roundings and/or protrusions
that could cause a shearing effect.
@
To comply with the safety regulations, the glide of the door panel VPA must be less than the door opening width VL.
- automation with 1 door panels which allows a single door panel to glide in one direction; Fig.3 shows an application with a
single door that opens toward the right (seen from the front of the automation); Fig.4, shows a single door that opens
toward the left (seen from the front of the automation).
VPA*
VL
LT/LC
25 25
75 75
VPA*
VL
LT/LC
25
75 75
VPA*
LT/LC
25
75
75
LT/
LC
LT/L
C
PC
BP
PC
BP
PC
PC
LT/
LC
LT/
LC
PC
BP
BP
PC
Fig.
2
Fig. 3
Fig.
4
VPA = net doorway width
VL = gross opening
LT/LC = lautomation length/
casing length
BP = rail + runner on the
floor
PC = electric wire raceway
1 RIGHT DOOR PANEL
1 LEFT DOOR PANEL
2 DOOR PANELS
LT/LC = lautomation length/
PC = electric wire raceway
VPA = net doorway width
VL = gross opening
casing length
BP = rail + runner on the
floor
VL = gross opening
casing length
BP = rail + runner on the
floor
PC = electric wire raceway
LT/LC = lautomation length/
VPA = net doorway width
8
EN INSTRUCTIONS FOR INSTALLATION AND USE DUEVILLE