17
2.3 Difference Measurement
Using this instrument, you can measure the difference from the standard data.
The procedures to measure the difference are described below.
Change to the difference measurement.
↓
Input or select the standard value.
The standard value can be stored up to 20 in this instrument.
↓
Perform measurement.
1.
Change the setting from “Absolute value
measurement” to “Difference measurement”.
Press the [ABS./DIF.] switch.
The display on the panel switch is changed to
“DIF”. The screen is changed as shown below
and the standard value input/selection screen
appears.
2.
Press the [MEAS./HOLD] switch to measure the standard value. After the measurement is
finished, the measurement result is indicated and it is registered as the standard value.
Each time you measure the standard value, the standard value number is increased and
registered.
Ｍ０
1→M
０
2→M
０
3…M20 When the number reaches “20”, it is returned to “01”.
Ｍ０１＊Ｓｔｄ
Ｓａｍｐｌｅ＊
２．０
２．０
６００ｎｍ
＝
１．５５９８Ｅ＋０２
Ｍ２０＊Ｓｔｄ
Ｓａｍｐｌｅ＊
２．０
＊＊
Ｎｏ
Ｄａｔａ
＊＊
Standard value number
(When standard data is not registered)
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
