26
3.1.3 Setting Numerical Value
In the function mode, there are items into which numerical values should be input. The procedures to
input numerical values are same in all the items.
The setting of integral time (in “MANU” mode”) will be explained as an example.
1.
Shift to the function mode, select [MEASURE] from the function menu and press the [ENTER]
switch. The following screen appears.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2.
Press [CHANGE]. The cursor is lit and the system is in the standby status.
3.
Press the [ROTATION] switch, change the measurement mode to “MANU”, and press the
[ENTER] switch to decide the change. Each time you press the [ROTATION] switch, the
mode is changed as shown below.
☞
4.
Press the [ENTER] switch again. The screen shown below appears.
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
＊
Ｉｎｔｅｇ
Ｔｉｍｅ
Ｉｎｐｕｔ
＊
Ｉｎｔｅｇ
[
ｍｓ
]
＝
１０００
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
AUTO→FREQ→MANU→SYNC
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
*
Ｍｅａｓｕｒｅ
Ｔｙｐｅ
*
＊ＡＵＴＯ
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
*
Ｍｅａｓｕｒｅ
Ｔｙｐｅ
*
＊ＡＵＴＯ
①
②
