41
3.10 Display/Change of Correction Factor
In the function mode, you can set whether correction factor should be used or not.
■
Setting whether correction factor should be used or not
1.
Shift to the function mode. Access [FACTOR]
from the function menu. Then, access the
[Factor ON/OFF] screen.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2.
To change the setting, press the [CHANGE] switch.
The part after “Factor (1nm) =” lights up.
3.
Each time you press the [ROTATION] switch
under this status, ON and OFF are changed to
each other.
4.
To decide the setting, press the [ENTER] switch.
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
＊
Factor ON
／
OFF
＊
Factor
（
1nm
）＝＊
OFF
＊
Factor ON
／
OFF
＊
Factor
（
1nm
）＝＊
OFF
＊
Factor ON
／
OFF
＊
Factor
（
1nm
）＝＊
OFF
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
