24
○
5
Integ Delay Time
:
Set the delay time. When “ON” is selected in
○
4
of (1),
this item is displayed.
☞
○
6
Single or Auto Run
: Set the measurement method.
☞
“3.4 Single or Auto Run”.
○
7
AverageMeas ON/OFF
: Set whether the average measurement function is used or
not.
☞
○
8
Average time
:
Set the average times. When “Average Meas” is selected
in
○
7
of (1), this item is displayed.
☞
(2)
FACTOR: This is relevant to correction factor.
○
1
Factor (1nm) ON/OFF
:
Set “Valid/Invalid” for the use of correction factor.
☞
“3.9 Using Correction Factor”.
(3)
COMM: This is relevant to communication.
○
1
Communication
– Type
: Set the data communication method (USB/RS-232C).
☞
“3.5 PC Communication Method”.
○
2
RS-232C Parameters
: Set the RS-
232C parameters. When “RS-232C” is
selected in
○
1
of (3), this item is displayed.
☞
○
3
Handshake ON/OFF
:
Set the data communication method. When “RS-232C” is
selected in
○
1
of (3), this item is displayed.
☞
“3.7 Data Communication Method”.
○
4
Delimiter
: Set the command terminal code when communicating with
PC.
☞
“3.8 Terminal Code of Remote Command”.
(4)
DISPLAY: This is relevant to the display on the LC display unit.
○
1
Auto Panel Light
:
Set “Valid/Invalid” for the use of auto panel light.
☞
“3.15 Setting Auto Panel Light”.
○
2
Beep ON/OFF
: Set whether the beep sound should occur or not.
☞
