48
3.15 Setting Auto Panel Light
When measuring, the LC display unit and switch LED can be automatically turned ON/OFF.
When measuring, the stray light from the LC display unit and switch LED does not have influence and
so measurement can be performed with higher accuracy.
The setting procedures are described below.
1.
Shift to the function mode. Access [DISPLAY] from the function menu. Then, access the
[Auto Panel Light] screen.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2.
Press the [CHANGE] switch.
3.
Press the [ROTATION] switch to select ON or OFF.
Each time you press the [ROTATION] switch, ON and OFF are changed to each other.
4.
After selecting, press the [ENTER] switch.
＊
Ａｕｔｏ
Ｐａｎｅｌ
Ｌｉｇｈｔ
＊
＊ＯＮ
