Toolots ZF-A5645, Manual

Page: 3 / 51

ZF-A5645-MANUAL
Second, the safety operation precautions
1, None except the operator can operate the machine. When the machine is in
automatic operation, the operator can not place the hand under the sealing knife
or within the range of the electric eye, so as to avoid the accident.
2, When the machine is running, the operator can not stretch out hands to the
front and the rear of conveyor rolling part, in case the hand was jammed or caught
into the machine.
3, When the machine automatically run, should keep the safety door close, to
avoid any contact with the sealing device and cause injury by burns, and other
hazards.
4, When the machine press to the product and alarm, or other failure occurs,
should first press the emergency stop switch, the operation mode should
change from automatic operation to manual operation. After all the failure
being cleared, release of emergency stop switch, turn back to automatic
operation.
5, pay attention to the film sending rubber roller and the needle roller part, when