Toolots ZF-A5645, Manual

Page: 16 / 51

ZF-A5645-MANUAL
each positioning-lines is 10mm; if the height of the packing product is
20mm or less, the left side of the film should be placed on the rightmost
position. If the packing height is more than 20mm, the higher the
packaging, the more left should the film be loaded. (Every 10mm higher
of the packing product, the film should be moved 5mm in the direction
of the positioning rod.)
C. After adjusting the film position, move the positioning rod on both sides,
adjust it to both ends of the film, and then lock the nut to fix.
(6) Turn on the heating switch to 1 (select ), and set the front and side
seals to the appropriate temperature (select & ). (See Table 5.2 for
temperature adjustment)
Film Needed Temperature Film Needed Temperature
PE Film 200
℃
~240
℃
POF 180
℃
~220
℃
Figure
5.3
Positioning rod A
Tripod
Positioning
Rod B
Open side
Positioning
Line