Toolots ZF-A5645, Manual

Page: 22 / 51

ZF-A5645-MANUAL
irregular shape. At this condition, the standard mode is not effective. And
should adopt view compensation mode, which has longer delay sealing time.)
(7) The machine can be used for the POF and PE shrink film, if you want to use PE
film, please use the PE special knife, and affixed with heat-resistant tape, so that
the upper sealing knife will not be in direct contact with PE film.
3, normal operation
(1) Start procedures
A. Turn on the power. ( )
B. Turn on the heater and let the temperature rise to the default. ( )
C. Switch the operating mode to automatic. (Select STARTUP)
D.Put the pack product into the conveyor, sealing action finish automatically.
A The machine is equipped with two emergency stop device, if any abnormal
conditions found, press this key, the sealing machine turn into the shutdown state,
at that time, the power indicator light from the stability to flash. After the
abnormal situation settled, release this Key, the machine will be able to run
normally., the power indicator light return steady light. (Button EMERGENCY)
(2) shutdown procedures:
A. First turn off the heater, so that the electric tube cooling, but this time there is
still more than the heating tube temperature, pay attention to avoid burns.
(Optional)
Figure5.
1
0
Heat -resistance tape
Upper sealing knife
Protection board