Toolots ZF-A5645, Manual

Page: 15 / 51

ZF-A5645-MANUAL
adjust the front conveyor belt position. After dragging to the
appropriate position, release the handle and lock the block to lock the
front conveyor. The adjustment is complete. The distance from the
guide rod to the product is 1 / 3-1 / 2 of the Product height.
(5) Load shrink film to the film fixing roller.
A. As shown in Figure 5.3, the shrink film is placed on the film feed roller.
Note: that the opening side of the shrink film must face the side of the
positioning of rod B.
B. There are 8 positioning-lines on the front film roller, the spacing between
Locking block
Hand-whe
el
Tripod
Handle
Guide rod
1
Locking
block
Figure 5.2
SP-line
Conne
cting
rod
Guide
Rod
Connecting
rod
Guide Rod