4
、
Instruction Manual
26
Only when this group of data is selected will it be active in the automatic loop.
Touching the gating button shows that the "
√
" data set is valid, and touching the gating
button again shows that the "
×
" data set is invalid.
"Processing size" : according to the requirements of the processing process input the
required workpiece length (unit: 0.1 mm).
"Set number" : according to the production schedule, enter the number of workpiece
required by the corresponding specification.
"Accumulated quantity" : dynamically displays the current accumulated quantity of the
workpiece of the corresponding size, which is convenient for production statistics.
。
If it is necessary to reset the current
accumulated processing quantity in this group, press the
"reset" button, and the system will pop up a dialog box (as
shown in the right figure). Press "confirm" to clear the data,
and then press "close" button to return to the interface.
"Saw seam compensation" : this is used to correct the saw blade thickness or other
mechanical small deviation caused by the overall size error.
Generally, the input data is about 1.00-2.00. If the workpiece size is small, the data
will be increased; if the workpiece size is large, the data will be decreased.